Bronze Bar Stock - Solid

Bronze Bar Stock - Solid Image

Full bars or cut-to-size. DBM maintains a large inventory of solid bronze bar stock. Available in these alloys: C95400 - Aluminum Bronze, C93200 - (SAE 660) Cast Bronze, C86300 - (SAE 430B) Manganese Bronze.

Please use the menu options below to help you select the Bronze Bar Stock - Solid that meets your specifications. If you are unsure of the product specifications or would like to browse our inventory of available Bronze Bar Stock - Solid you can scroll down to view our list of Bronze Bar Stock - Solid below.

C95400 - Aluminum Bronze Bar Solid - 144 Inch Standard Length
Part #
O.D.
Nominal
1/2
3/4
1 1/4
1 1/2
1 5/8
1 3/4
2 1/4
2 1/2
2 3/4
3 1/4
3 1/2
3 3/4
4 1/4
4 1/2
4 3/4
5 1/2
6 1/2
C93200 - (SAE 660) Cast Bronze Bar Solid - 105 Inch Standard Length
Part #
O.D.
Nominal
1/2
5/8
3/4
7/8
1 1/8
1 1/4
1 3/8
1 1/2
1 5/8
1 3/4
1 7/8
2 1/8
2 1/4
2 3/8
2 1/2
2 5/8
2 3/4
2 7/8
3 1/4
3 1/2
3 3/4
4 1/4
4 1/2
4 3/4
5 1/2
6 1/2
7 1/2
C93200 - (SAE 660) Cast Bronze Bar Solid - 13 Inch Standard Length
Part #
O.D.
Nominal
1 1/8
1 1/4
1 3/8
1 1/2
1 5/8
1 3/4
1 7/8
2 1/8
2 1/4
2 3/8
2 1/2
2 5/8
2 3/4
2 7/8
3 1/4
3 1/2
3 3/4
4 1/4
4 1/2
4 3/4
5 1/2
6 1/2
7 1/2
C86300 - (SAE 430B) Manganese Bronze SOLID Bar - 144 Inch Standard Length
Part #
O.D.
Nominal
1 1/2
2 1/2
3 1/2
4 1/2

C95400 - Aluminum Bronze Bar is used for low speed, and very high load bearing applications. 95400 requires hardened steel shafts and constant lubrication of grease, graphite or molybdenum-disulfide.

C93200 - (SAE 660) Cast Bronze Bar is a general-purpose bearing, bushing and washer material with good anti-frictional properties, moderate load-carrying ability and good machinability.

C86300 - (SAE 430B) Manganese Bronze Bar is a very hard and strong bronze. Good applications include heavy earth moving equipment, roll neck bearings, and machine tool bearings.

Bronze Material Specifications

C93200/ SAE 660
C95400 / SAE J461
Aluminum Bronze
C86300 / SAE 430B
Mangenese Bronze
ASTM B-144-52-3B
Copper 81.00 – 85.00%
Tin 6.25 – 7.50%
Lead 6.00 – 8.00%
Zinc 2.00 – 4.00%
ASTM B505-08
Copper 83.00% min.
Aluminum 10.00 – 11.50%
Iron 3.00 – 5.00%
ASTM B22
Copper 60.00 – 66.0%
Zinc 22.00 – 28.0%
Iron 2.00 – 4.00%
Aluminum 5.00 – 7.50%
Mangenese 2.50 – 5.00%
Tensile Strength 44,000 PSI
Yield Strength 24,000 PSI
Elongation in 2 inches 16%
Tensile Strength 95,000 PSI
Yield Strength 45,000 PSI
Elongation in 2 inches 10%
Tensile Strength 110,000 PSI
Yield Strength 62,000 PSI
Elongation in 2 inches 14%
** PV 75,000
P = 3,000
V = 750
PV 125,000
P = 4,000
V = 225
PV 150,000
P = 8,000
V = 4000
Min. Temp: -450F
Max. Temp: +500F
Min. Temp: -450F
Max. Temp: +750F
Min. Temp: -450F
Max. Temp: +400F

**Loads and Speeds

Load and speed limitations must be ascertained in order to insure proper bearing design. If design limits are exceeded, the bearing life will decrease and could result in premature failure. To determine the capacity of a bearing, use the following PV formula.

PV = The load per square inch of project area
P = Load
I.D. x Length

V = Shaft velocity in feet per minute