DBM maintains a Large Inventory of Bronze Bar & Plate Stock

When you source your bronze bar and plate from DBM you will get total price transparency, absolutely no hidden costs.


C95400 - Aluminum Bronze

  • SOLID Bar
  • Cord Bar
  • Rectangular Plate

Aluminum bronze is a very hard, strong, abrasion resistant bronze whose physical properties remain good at elevated temperatures – compressive strength at 500°F is the same as that of tin bronzes at room temperature. Good applications include heavy earth moving equipment, roll neck bearings, and machine tool bearings.

Solid and cored bars are stocked in 144" lengths and are available in other lengths and non-standard sizes. Consider bars for use when you need special bearings, bearings for prototypes, or for emergency repairs.

C95400 is available in either as cast condition or heat-treated.

Typical Properties: (Not to be used for specification purposes.)

  • Copper: 83.00% min.
  • Aluminum: 10.00 – 11.50%
  • Iron 3.00: – 5.00%

Physical Properties: Continuous Cast

  • As Cast
  • Tensile Strength, PSI: 85,000 min.
  • Yield Strength, PSI: 32,000 min.
  • Elongation: 12% min.

Heat Treated

  • Tensile Strength, PSI: 95,000 min.
  • Yield Strength, PSI: 45,000 min.
  • Elongation: 10% min.
  • Brinell Hardness (3000 kg load; As Cast): 170
  • Brinell Hardness (3000 kg load; Heat Treated): 195
  • Machinability Rating: 60
  • Minimum Operating Temperature: -450°F
  • Maximum Operating Temperature: 750°F intermittent to 1200°F

C95400 Aluminum bronze is used for low speed, and very high load bearing applications. C95400 requires hardened steel shafts and constant lubrication of grease, graphite or molybdenum-disulfide.

WARNING: This product can expose you to chemicals including nickel & lead, which is known to the state of California to cause cancer and lead, which is known to the state of California to cause birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov.


C93200 - SAE 660 Cast Bronze - High-Leaded Tin Bronze

  • SOLID Bar
  • Cord Bar
  • Rectangular Plate

DBM continuous cast bronze bars of C93200 give superior quality and performance. Continuous casting achieves a high-density grain structure, free of porosity, resulting in a reduction of tool wear and component rejects.

Solid and cored bars are stocked in 105" lengths and are available in other lengths and non-standard sizes. Consider bars for use when you need special bearings, bearings for prototypes, or for emergency repairs.

Typical Properties: (Not to be used for specification purposes.)

  • Copper: 81.00 – 85.00%
  • Tin: 6.25 – 7.50%
  • Lead: 6.00 – 8.00%
  • Zinc: 2.00 – 4.00%

Physical Properties: Continuous Cast

  • Tensile Strength, PSI: 35,000 min.
  • Yield Strength, PSI: 20,000 min.
  • Elongation: 10% min.
  • Brinell Hardness (500 kg load): 65 typical
  • Machinability Rating: 70
  • Minimum Operating Temperature: -450°F
  • Maximum Operating Temperature: 500°F

C93200 is a general-purpose bearing, bushing and washer material with good anti-frictional properties, moderate load-carrying ability and good machinability.

WARNING: This product can expose you to chemicals including nickel & lead, which is known to the state of California to cause cancer and lead, which is known to the state of California to cause birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov.


C86300 - SAE 430B Manganese Bronze

  • SOLID Bar
  • Cord Bar

Manganese bronze is a very hard and strong bronze. Good applications include heavy earth moving equipment, roll neck bearings, and machine tool bearings.

Solid and cored bars are stocked in 144" lengths and are available in other lengths and non-standard sizes. Consider bars for use when you need special bearings, bearings for prototypes, or for emergency repairs.

Typical Properties: (Not to be used for specification purposes.)

  • Copper: 60.00 – 66.00%
  • Zinc: 22.00 – 28.00%
  • Iron: 2.00 – 4.00%
  • Aluminum: 5.00 – 7.50%
  • Manganese: 2.50 – 5.00%

Physical Properties: Continuous Cast

  • Tensile Strength, PSI: 110,000 min.
  • Yield Strength, PSI: 62,000 min.
  • Elongation: 14% min.
  • Brinell Hardness (3000 kg load): 225 typical
  • Machinability Rating: 80
  • Minimum Operating Temperature: -450°F
  • Maximum Operating Temperature: 400°F

C86300 Aluminum bronze is used for low speed, and very high load bearing applications. C86300 requires hardened steel shafts and constant lubrication of grease, graphite or molybdenum-disulfide.

WARNING: This product can expose you to chemicals including nickel & lead, which is known to the state of California to cause cancer and lead, which is known to the state of California to cause birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov.

Bronze Solid Bar Image

Solid Bar

Bronze Cored Bar Image

Cored Bar

Bronze Plate Image

Bronze Plate